|
Installed 1.165 Systems in Operation
The photo above shows a 165 unit installed in a shipping harbor.
In the photo to the immediate right you will see a unit which is used
at a truck stop control point (photos courtesy from Spain).
Main Features:
-
Moisture Insensitive
Laser combined
with high quality quartz collimators ensuring maximum sensitivity and
consequently precise airborne particle size identification independent
of sample air temperature.
-
High Speed
Pulse Height Analyzer capable
of classifying definable even high concentrations of particles in up
to 15 different size ranges.
-
Electronically
Controlled Sample Flow delivering
constant pulse-free air volume samples at all times.
-
Integrated Dust
Collection Filter which
contains the collected particle samples for possible chemical or
physical post-analysis.
-
Integrated
Temperature and Humidity sensors
to re-cord environmental conditions at all times.
-
Access port
for Additional Climatic Sensors
which
can be attached to record weather conditions as well.
-
Powered by a
18V (DC) or 110/230V (AC) at
50/60 HZ. ( External power source can be a truck-battery or even a
solar panel or wind generator).
|
Stand-Alone
Model 1.165
The above photo shows the System 165 with the front panel open.
Visible is the dust monitor (in green), on the left
(in blue) the dryer, above (in black and white) is the electronic control system.
Located on top of the housing is on the left the
environmental sensor and on the right the sampling tube inlet shown.
Benefits:
-
Internal Data
Acquisition System via
removable data storage card. (Capable of
recording up to 1 year of data).
-
Telecommunications
Data Transmission provides
you with a remote control and monitoring option for fixed or mobile data transmissions.
-
Integrated
Dehumidification System eliminates
particle nuclear condensation and particle miscounts. This means no loss due to volatile organics, droplets
etc. since no
sample heating is required.
-
Integrated
Air Pressure Sensor allows
post-correction to the norm m3 of
altitude changes.
-
Optical bench
is insensitive to
vibration allowing higher mobility, instant readings and long term stability.
-
Definable
PM-Dust Alarm Level
gives the users the ability to predefine critical limits.
-
Low
Maintenance - only
monthly filter and dehumidification cartridge replacement is required.
|
